IR Sensor Module – LM393 Photoelectric Sensor Module
Specifications
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
Original price was: ₹14.₹5Current price is: ₹5.
IR sensor module lm393 is a sensor module which you can use to identify the distance between obstacles, identifying changes in surroundings etc. applications. It has an IR transmitter, IR Receiver, LM393 and a potentiometer to set a threshold for digital output. When light brightness of ambient is less than the set threshold, DO-side output is high, when light brightness of ambient is over the threshold, DO-ended output is low. This module can be used in obstacle detection in autonomous robots and cars, in positional feedback for control system, industrial safety system, Wheel encoder etc.
Specifications
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
Product Description
In order to use this module, you have to power the module via VCC and GND pin from 5V and GND pins respectively of your microcontroller board. It is a digital output sensor so it cant be used to measure the distance of object from the sensor module but you can detect the object in the adjustable sensing range. Connect the Digital Output pin to any GPIO pin your microcontroller board like Arduino or Raspberry Pi etc.
Additional Resources
Obstacle Avoiding Robot using PIC Microcontroller
Package Contents
1×IR LM393 Photoelectric Sensor Module
“
You may also like…
Dual Shaft DC Geared Motor (300RPM) Applications:
- Robotics
- Automation
- In various Vehicle
- Toys
- Different gear movement related operations
74 in stock
Applications of Arduino Nano :
- It has 22 I/O pins in total in which 14 are Digital (6 are PWM output) and 8 are Analog pins.
- Operating Voltage (Logic Level): 5V.
- Supports Serial, I2C, SPI Communication Protocols.
- Flash memory: 32KB in which 2KB is used by Bootloader
- Clock speed: 16MHz
- DC Current per I/O Pin: 40 mA
- SRAM : 2KB, EEPROM: 1KB
- DC Current per I/O pin: 40mA
83 in stock
96 in stock
Related Products…
- Operating voltage: +5V
- Operating Current: <15mA
- Theoretical Distance that can be measured: 2cm to 4m
- Practical Distance that can be measured: 2cm to 80cm
- Accuracy: 3mm
- Measuring angle covered: <15°
90 in stock
Specifications
- Working Current: 3A
- Maximum Peak Current: 6A
- Overcharge Voltage Range: 4.25-4.35V per cell
- Over-Discharge Voltage: 2.3-3.0V
- Quiescent Current: <30µA
98 in stock
4×4 Keypad Applications:
- Hobby Projects
- Security systems
- Measurement Instruments
- Vending machines
- Industrial machines
- Data entry for Embedded Systems
99 in stock
A3144 Hall Sensor Specifications and Features:
- Power Consumption of 3.5mA at VCC = 5V for Energy Efficiency
- Miniature Construction
- Single Current Sourcing Output
- Linear Output for Circuit Design Flexibility
- Low Noise Output Virtually Eliminates the Need for Filtering
- A Stable and Accurate Output
- Temperature Range of -40°C to +85°C
- Responds to Either Positive or Negative Gauss
99 in stock
Specifications
- Battery Pack Output 12.8V (4S Type)
- This BMS only Used For LifePO4, not For Lithium-Ion Batteries
- Deep Discharge & Over Charging Protection
- Battery Capacity- 10A
- Voltage 12.8v
- Size Prismatic
- Battery Type-Lithium Iron Phosphate
- Usage/Application-Solar Light
- Current 10 Amp
75 in stock
TP4056 Module Specifications:
- Input voltage : 4.5V ~ 5.5V
- A full charge voltage: 4.2V
- Power: 4.2 w
- Charging accuracy: 1.5%
- Charging indicator: micro LED
- Input Interface: Micro USB port
- Charging method: linear charge
- Operating Temperature: -10 to +85ºC
5 in stock
Specifications
- Battery Compatibility: Designed for 4S LiFePO4 batteries with a nominal voltage of 12.8V.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 20 A.
- Balancing: Equipped with a balancing function to ensure all cells in the battery pack maintain the same voltage, optimizing performance and longevity.
- Safety Features: Offers overcharge protection, over-discharge protection, and short-circuit protection to safeguard the battery pack.
95 in stock
Specifications
- Battery Configuration: Designed for 3 series-connected lithium-ion cells (3S).
- Nominal Voltage: 11.1V nominal voltage when using 3.7V NMC cells.
- Maximum Discharge Current: Capable of handling a maximum discharge current of 15 amperes.
- Nickel Strip Inclusion: Comes with a nickel strip for secure battery pack assembly.
- Protection Features: Includes overcharge and over-discharge protection to safeguard individual cells.
- Cell Balancing: Equipped with a balancing function to maintain uniform cell states of charge
49 in stock
86 in stock
Specifications
- Battery Compatibility: Designed for use with 3.7V NMC (Nickel Manganese Cobalt) lithium cells.
- Protection Features: Offers comprehensive protection, including overcharge protection, over-discharge protection, and short-circuit protection.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 10 A.
- Nickel Strip: Includes a nickel strip for easy and secure installation.
100 in stock
Applications of NTC Thermistor:
- Resistance at 25 degrees C: 10K +- 1%
- B-value (material constant) = 3950+- 1%
- Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air) approx.7.5mW/K
- Thermal cooling time constant <= (in air) 20 seconds
- Come with broad resistance range
- Provided with lacquer-coated thermistor disk
- Thermistors
- Resistance Temperature Device (RTD):
99 in stock
Reviews
There are no reviews yet.