100V 10A Dual LED Voltmeter Ammeter Monitor Panel
Specifications and Features of Volt meter and AMP meter:
- Voltage measuring range: DC 0-100V,
- Current measuring range: DC 0-10A
- Working voltage 4.5 to 30V DC.
- Input current: Less than 20mA
- Dual 4 bit 0.28″ clear LED display – RED for Voltage and Sky Blue for Current Display
- Display Resolution: 0.1V, 0.01A
Original price was: ₹331.₹208Current price is: ₹208.
This 100V 10A Dual LED Voltmeter Ammeter Monitor Panel is a simplistic solution that can be used for DC Volt and Amp meter related operations. It has upper and lower groups of LED’s to display measured Voltage and current data where the measuring Voltage range is 0V-100V DC and the Current reading range is 0A to 10A.
Since this module comes with an internal sense resistor, no additional resistor is required to be used for current sensing operations.
It can support a wide range of operating voltages from 4.5V to 30VDC. Do not use input voltage more than 30VDC.
Specifications and Features of Volt meter and AMP meter:
- Voltage measuring range: DC 0-100V,
- Current measuring range: DC 0-10A
- Working voltage 4.5 to 30V DC.
- Input current: Less than 20mA
- Dual 4 bit 0.28″ clear LED display – RED for Voltage and Sky Blue for Current Display
- Display Resolution: 0.1V, 0.01A
- Measurement accuracy: ± 1%
Dimension:
Applications:
- Voltage and Current Measurement in different Load applications
- Bench Power supply
- Different type of SMPS where display is required
- Voltmeter applications
- Motor Driving or Electronic Car
- E Vehicle Charging display
Package Contains:
1x 100V 10A Digital Volt Amp meter
1x High current Wire for Voltage Measurement with 2 Pin JST connector on one side
1x 3 pin JST connector for Power input and Voltage measurement.
Example Projects:
Additional Resources:
Related Products…
TP4056 Module Specifications:
- Input voltage : 4.5V ~ 5.5V
- A full charge voltage: 4.2V
- Power: 4.2 w
- Charging accuracy: 1.5%
- Charging indicator: micro LED
- Input Interface: Micro USB port
- Charging method: linear charge
- Operating Temperature: -10 to +85ºC
76 in stock
- Evenly lighted segments
- Common Anode Circuitry
- Color : Red
95 in stock
TP4056 Module Specifications:
- Input voltage : 4.5V ~ 5.5V
- A full charge voltage: 4.2V
- Power: 4.2 w
- Charging accuracy: 1.5%
- Charging indicator: micro LED
- Input Interface: Micro USB port
- Charging method: linear charge
55 in stock
- Operating Voltage: 4.7V to 5.3V
- Operating Current: 1mA (without backlight)
- Can display (16×2) 32 Alphanumeric Characters
- Supports Custom Characters
- Operates in both 8-bit and 4-bit Mode
91 in stock
Features and Specifications:
- Battery discharging stop voltage: 2.9V.
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
- Preset 4.2V charging voltage, precision ±1%.
- Max 8uA standby current.
- Integration charging management and discharging management.
65 in stock
TP4056 Module Specifications:
- Input voltage : 4.5V ~ 5.5V
- A full charge voltage: 4.2V
- Power: 4.2 w
- Charging accuracy: 1.5%
- Charging indicator: micro LED
- Input Interface: Micro USB port
- Charging method: linear charge
- Operating Temperature: -10 to +85ºC
5 in stock
Reviews
There are no reviews yet.