100K Potentiometer
Specifications
- Rotary type shaft potentiometer
- 15mm shaft length
- Total Resistance 100kΩ
Original price was: ₹35.₹21Current price is: ₹21.
Potentiometers are very useful in changing the electrical parameters of a system. It is a single turn 100k Potentiometer with a rotating knob. These potentiometers are also commonly called as a rotary potentiometer or just POT in short. These three-terminal devices can be used to vary the resistance between 0 to 100k ohms by simply rotating the knob. A potentiometer knob can also be used along with this POT for aesthetic purposes.
Â
Specifications
- Rotary type shaft potentiometer
- 15mm shaft length
- Total Resistance 100kΩ
Product Description
You would have to connect it to a voltage supply at the above mentioned pin and connect ground to GND pin and take the output from the middle pin as shown in the figure above.
Package Contents
1× 100K Ohm single 3 pin potentiometer
1× Washer
1× Nut
Related Products…
BC547 Applications
- Used both as a Switch and Amplifier in Various Circuits.
- Used in Driver Modules like Relay Driver, LED driver etc.
- Used in Amplifier modules like Audio amplifiers, signal Amplifier etc.
- Darlington pair
61 in stock
Applications of 5mm LED :
- Used as indicators in products and designs
- Toys & Games
- Lighting Products
- Electronic projects
- Light Emitting Diode
- Diode Emitting Light
85 in stock
Applications of RGB LED :
-
- Ideal for Multicolor displays
- Low current consumption
- 5mm diameter
- LED Type : Water Clear/ Diffused
- View Angle: Water Clear 360 degrees; Diffused 250 degrees
- Luminous Flux :4-5LM
- Operating Temperature is -24 – 85 °C
- Wavelength :- RED : 625nm; Green: 520nm; Blue: 467nm
- Forward Current :- Red: 20 mA; Green: 20 mA; Blue: 20 mA
- Forward Voltage :- Red: 1.8V – 2.2V; Green: 3.0V – 3.4V; Blue: 3.0 V – 3.4V
- Luminous intensity :- Red: 800 mcd; Green: 4000 mcd; Blue: 900 mcd
- To prolong the lifespan of the LED, the input current should be below 20mA
51 in stock
Specifications
- Bi-Polar high current NPN Transistor
- DC Current Gain (hFE)is 100 to 300
- Continuous Collector current (IC) is 800mA
- Emitter Base Voltage (VBE) is 6V
- Collector-Emitter Voltage (VCE) is 40V
- Base Current (IB) is 5mA maximum
- Available in To-92 Package
- Rise Time 25nSec, Fall Time 60nSec
53 in stock
Applications of ceramic capacitor :
- Filter circuits like High/Low pass filter etc.
- For Filtering noise from a circuit
- Smoothing ripples in converters
- For decoupling and by pass circuits
- Fading LED circuits
- Resonant circuits.
- calculating capacitance
100 in stock
Applications of 5mm LDR :
- Disc Diameter: 5mm
- Light Resistance: 5-10k Ohm
- Dark resistance: upto 500k Ohm
- Maximum Operating Temperature: +800 degree Celsius
- Type of Mounting: Through Hole(PTH)
- Light Dependent Resistor
- Light Detecting Resistor
74 in stock
Applications of 1K Ohm Resistor Pack :
- Highly Reliable 1k ohm Resistor
- ±5% Tolerance
- Power Rating: 0.25W
- Package: Axial
- Mounting Feature: Through-hole
- Composition: Carbon Film Type
- Excellent Heat and Humidity Withstand Performance
- Long Life
- Automatically insertable
- Ohm Rating
- Resistance
58 in stock
Specifications of 5V Relay
- Trigger Voltage (Voltage across coil) : 5V DC
- Trigger Current (Nominal current) : 70mA
- Maximum AC load current: 7A @ 250/125V AC
- Maximum DC load current: 10A @ 30/28V DC
- Compact 5-pin configuration with plastic moulding
- Operating time: 10msec Release time: 5msec
- Maximum switching: 300 operating/minute (mechanically)
71 in stock
Applications of 5mm LED :
- Used as indicators in products and designs
- Toys & Games
- Lighting Products
- Electronic projects
- Diode Emitting Light
- LED
90 in stock
Applications of NTC Thermistor:
- Resistance at 25 degrees C: 10K +- 1%
- B-value (material constant) = 3950+- 1%
- Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air) approx.7.5mW/K
- Thermal cooling time constant <= (in air) 20 seconds
- Come with broad resistance range
- Provided with lacquer-coated thermistor disk
- Thermistors
- Resistance Temperature Device (RTD):
99 in stock
Features of 1000uF 50V Electrolytic Capacitor
- calculating capacitance: 1000uF
- Maximum Voltage: 50 Volts
- Tolerance: ±15%
- Capacitor Type: Radial Through Hole Electrolytic
- Polarization: Yes. Line with ‘-‘ denotes negative lead
- Max Temperature: +85°C
100 in stock
- Output voltage: 5v
- Dropout voltage (Max): 2.5v @ 1A
- Output Current: 1.5 A
- Load regulation: 100 mv
96 in stock
Reviews
There are no reviews yet.