2N2222 NPN Switching Transistor
Specifications
- Bi-Polar high current NPN Transistor
- DC Current Gain (hFE)is 100 to 300
- Continuous Collector current (IC) is 800mA
- Emitter Base Voltage (VBE) is 6V
- Collector-Emitter Voltage (VCE) is 40V
- Base Current (IB) is 5mA maximum
- Available in To-92 Package
- Rise Time 25nSec, Fall Time 60nSec
Original price was: ₹16.₹6Current price is: ₹6.
The 2n2222 npn switching transistor is a common NPN Bipolar Junction Transistor (BJT) is used for general purpose low power amplifying or switching actions. As it is an NPN transistor, so collector and emitter will be left open when no signal is at the base and when a signal is provided to the base terminal, then the emitter and collector will be closed i.e. they will start conducting as BJT will operate in Saturation Region. 2N2222A has a gain value of 110 to 800, this value determines the amplification capacity of the transistor. The maximum amount of current that could flow through the Collector pin is 800mA, hence we cannot connect loads that consume more than 800mA using this transistor. To bias a transistor, we have to supply current to base pin, this current (IB) should be limited to 5mA. It can be used in switching applications with current up to 800mA, in speed control of motors, also it can be used in Darlington Pair.
Â
Specifications
- Bi-Polar high current NPN Transistor
- DC Current Gain (hFE)is 100 to 300
- Continuous Collector current (IC) is 800mA
- Emitter Base Voltage (VBE) is 6V
- Collector-Emitter Voltage (VCE) is 40V
- Base Current (IB) is 5mA maximum
- Available in To-92 Package
- Rise Time 25nSec, Fall Time 60nSec
Â
Additional Resources
Arduino Based Project using 2N2222A BJT
Raspberry Pi based project 2N2222A NPN BJT
Â
Package Contents
1×2N2222A NPN Switching Transistor
Related Products…
Applications of NTC Thermistor:
- Resistance at 25 degrees C: 10K +- 1%
- B-value (material constant) = 3950+- 1%
- Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air) approx.7.5mW/K
- Thermal cooling time constant <= (in air) 20 seconds
- Come with broad resistance range
- Provided with lacquer-coated thermistor disk
- Thermistors
- Resistance Temperature Device (RTD):
99 in stock
Applications of 5mm LED :
- Used as indicators in products and designs
- Toys & Games
- Lighting Products
- Electronic projects
- Diode Emitting Light
- LED
90 in stock
Applications of ceramic capacitor :
- Filter circuits like High/Low pass filter etc.
- For Filtering noise from a circuit
- Smoothing ripples in converters
- For decoupling and by pass circuits
- Fading LED circuits
- Resonant circuits.
- calculating capacitance
100 in stock
Applications of 10K ohm, 1/4 Watt Resistor :
- Highly Reliable 10K ohm Resistor
- ±5% Tolerance
- Power Rating: 0.25W
- Package: Axial
- Mounting Feature: Through-hole
- Composition: Carbon Film Type
- Excellent Heat and Humidity Withstand Performance
- Long Life
- Automatically insertable
- Resistance
- Ohm Rating
89 in stock
Specifications
- Forward Voltage: 2.85V
- Size: 5mm
- Color: Blue
- Diode Emitting Light
- LED
95 in stock
Specifications
- Small signal N-Channel MOSFET
- Continuous Drain Current (ID) is 49A at 25°C
- Pulsed Drain Current (ID-peak) is 160A
- Minimum Gate threshold voltage (VGS-th) is 2V
- Maximum Gate threshold voltage (VGS-th) is 4V
- Gate-Source Voltage is (VGS) is ±20V (max)
- Maximum Drain-Source Voltage (VDS) is 55V
- Available in To-220 package
98 in stock
Specifications for this 10K Trimpot:
- Material used: Metal
- Value: 0-10K
86 in stock
Applications:
- Used in filter circuits like High/Low pass filter etc.
- Used in Resonant Circuits / capacitor
- To remove noise from a circuit
- Used in DC-DC converters and Power supply circuits
- To Smoothen ripples in converters
- Fading LED circuits
- calculating capacitance
- electrolytic capacitor
90 in stock
Features of 1000uF 50V Electrolytic Capacitor
- calculating capacitance: 1000uF
- Maximum Voltage: 50 Volts
- Tolerance: ±15%
- Capacitor Type: Radial Through Hole Electrolytic
- Polarization: Yes. Line with ‘-‘ denotes negative lead
- Max Temperature: +85°C
100 in stock
Specifications of 5V Relay
- Trigger Voltage (Voltage across coil) : 5V DC
- Trigger Current (Nominal current) : 70mA
- Maximum AC load current: 7A @ 250/125V AC
- Maximum DC load current: 10A @ 30/28V DC
- Compact 5-pin configuration with plastic moulding
- Operating time: 10msec Release time: 5msec
- Maximum switching: 300 operating/minute (mechanically)
71 in stock
- Capacitance: 10uF
- Maximum Voltage: 50 Volts
- Tolerance: ??15%
- Capacitor Type: Radial Through Hole Electrolytic
- Polarization: Yes. Line with ???-??? denotes negative lead
- Max Temperature: +85??C
100 in stock
- Output voltage: 5v
- Dropout voltage (Max): 2.5v @ 1A
- Output Current: 1.5 A
- Load regulation: 100 mv
96 in stock
Reviews
There are no reviews yet.